Absulty Newbie Questions On Minner Setup

Discussion in 'cgminer' started by jimmy16, Feb 6, 2016.

  1. 2017/12/15 - Decred v1.1.2 released! → Release Notes  → Downloads
  1. jimmy16

    jimmy16 Jr. Member

    Jan 8, 2016
    143
    33
    Male
    #1 jimmy16, Feb 6, 2016
    Last edited: Feb 8, 2016
    Can i get some tips on fin tuning my configuration.. look over my setting.
    "intensity" : "d,d",
    "vectors" : "1,1",
    "worksize" : "256,256",
    "kernel" : "blake256,blake256",
    "gpu-engine" : "0-0,0-0",
    "gpu-fan" : "0-85,0-0",
    "gpu-memclock" : "0,0",
    "gpu-memdiff" : "0,0",
    "gpu-powertune" : "0,0",
    "gpu-vddc" : "0.000,0.000",
    "temp-cutoff" : "95,95",
    "temp-overheat" : "85,0",
    "temp-target" : "75,0",
    "api-mcast-port" : "4028",
    "api-port" : "4028",
    "benchmark" : true,
    "expiry" : "120",
    "gpu-dyninterval" : "7",
    "gpu-platform" : "1",
    "gpu-threads" : "1",
    "log" : "5",
    "no-pool-disable" : true,
    "queue" : "1",
    "scan-time" : "5",
    "blake256" : true,
    "temp-hysteresis" : "3",
    "shares" : "0",
    "kernel-path" :

    Need map-gpu
     
  2. BlackFire

    BlackFire New Member

    Jan 28, 2016
    8
    2
    What GPU do you have?

    Here is a link to a guide on tuning your GPU. It's for scrypt but the same methods apply. You should be able to tune directly in cgminer by pressing G to go to the GPU menu and the pressing C to configure the GPU. It will ask you to select a GPU to tune. You can tune GPU-Engine, GPU-Fan, GPU Memclock, Voltage etc.

    Once you have your GPU tuned, from the main cgminer window, press D to display settings and the W to write the config.

    You can then run cgminer using the config with cgminer --config NameOfTheConfigFile.

    Hope that helps.
     
    jimmy16 likes this.
  3. jimmy16

    jimmy16 Jr. Member

    Jan 8, 2016
    143
    33
    Male
    I have a nvidia tesla m2090 512 core GPU , it only seems to run 1 thread i don't see a link in your post. thank you
     
  4. jimmy16

    jimmy16 Jr. Member

    Jan 8, 2016
    143
    33
    Male
  5. jimmy16

    jimmy16 Jr. Member

    Jan 8, 2016
    143
    33
    Male
    https://github.com/decred/cgminer/blob/3.7/GPU-README
     

Share This Page